Best 3D Printers In India Of 2020 – Reviews & Buyer’s Guide

1. Wol 3D Upgraded2. Wol 3D3. 3D Innovations

Wol 3D Best 3D Printer In India

Wol 3D Ender 3

3D Innovations Ender-3

CHECK PRICE! CHECK PRICE! CHECK PRICE!

Technology is as much a part of our lives now as anything else. Everything we do – from the food we eat to the clothes we wear and the songs we listen to is, in some way or the other a by product of technology.

It has taken over our lives in ways that no one could have predicted up until a few years ago and continues to be imperative and integral to all aspects of our lives.

When it comes to the digital world, the biggest revolution has perhaps been the internet, and the way it has changed the ways of living all over the world.

CHECK THE TOP 10 3D PRINTERS NOW!

Computers and associated accessories themselves have gone through hundreds of makeovers and technological upgrades to reach at a point today where they are amazingly versatile and ridiculously convenient.

Whether it is the sound systems that we use, or input devices, or the way we look at digital content through monitors and projectors, everything has experienced rapid advancement and upgrade and now offers the best of the best experience.

Printers The Utility

But talking of computer peripherals and accessories, if there is one piece of hardware that we don’t give enough credit to, it is the printer. Think of how amazing it actually is.

You get to type anything, or doodle anything you want on your system, and within mere seconds, you can get an actual physical hard copy of the same. You get to design posters, prepare physical notes in immaculate writing, and much more.

All you really need is a decent printer device and some ink cartridges. It is great for all kinds of people, whether you are someone who works in the creative agencies, or are in the business of creating content, a journalist, or just someone with a passion to create – the printer will be the one stop solution to all your needs.

If you are a student, the best 3D printer in India will be no less than a blessing for you. There is so much that a student needs to remember and memorize, that sometimes actual physical notes prove to be far more effective that stored digital copies on some forgotten pen drive or hard disc.

When you are preparing for your exams, you can’t be bothered to or have the time to open up your laptop every time you want to consult your notes. But if you had physical copies of your notes prepared, you could look them up anytime or anywhere.

Also, since students have to go through not one, but countless different exams all throughout their academic career, it really helps if they have the complete syllabus printed out somewhere, so they know exactly what they need to be studying.

Furthermore, talking of tests, it won’t hurt to have the exam schedule printed in case you are someone who tends to forget a lot of things, and may accidently jumble up the examination dates in your mind.

Now to take the discussion on printers forward, something worth mentioning here is that no longer are we printing 2D copies of plain text or pictures, but in fact are now capable of printing out 3D models of everyday objects. Yes, you read that right.

With 3D printers, you will now be able to print out practically anything you want, all in its complete 3 dimensional glory. Imagine looking at a picture of an object online.

And imagine liking it so much that you decide to get it for yourself. Now what if you could actually get in in no time by printing using your own 3D printer? The technology is so amazing it is insane to think of the possibilities.

Best 3D Printer Technology

3D printing is also sometimes called additive manufacturing, because you are essentially manufacturing objects by adding layers one on one in a gradual process.

You need to first create a digital file which will essentially act as a blueprint for the shape that you want to print. Once you have finalized this blueprint and created the file, you need to feed this file into the system and the printer will churn out your 3D model in no time.

Like we said before, 3D printing is done through the additive process. As per this, first the object is selected and finalized. After that, the first layer of material is deposited in the exact same shape as the blueprint suggests.

The next layer is then deposited over this first layer as per the design specifications. So on and so forth, all the different layers come together one by one to finally create an object that is absolutely identical to your reference object.

If you are confused about these individual layers, you can think of them as horizontal cross sections of the original object. Think of the model as a loaf of bread.

If the bread is sliced into multiple pieces, each slice is analogous to a single layer of the 3D print. And the full load is akin to your finished and complete 3D model.

In fact, if you have ever seen a subtractive manufacturing process, think of 3D printing as the exact opposite of that. While the former consists of cutting out or hollowing out a piece of metal or plastic, 3D printing is the process of formulating a 3D shape by putting together various layers of some material.

The reason why this technique is gaining so much popularity these days, and why it is the one thing everyone seems to be talking about is very simple and straightforward.

3D printing helps you create complex as well simple 3D shapes and models with far less material, than what will supposedly be used if more traditional and conventional manufacturing processes were used.

3D Printing: The Process

The first step of the process is to create a digital version of the 3D model you want to create. You can acquire this model either by creating it yourself from scratch, or you could download it from the multitudes of online libraries which are easily available and are just one quick search away.

If you are planning to create it yourself though, do not think that you are getting into an overly difficult task, for it can be a fairly simple process. All you need are the right tools and you are set.

For the sole purpose of creating 3D models that you can later print, there are several applications and software available to purchase and download online. You can even use a 3D scanner, app, haptic device, code or 3D modeling software.

If you are planning to use an online tool or a downloadable software, it is best that we warn you about the fact that industrial grade software can easily cost thousands a year per license. However, the good part is that there is also open source software you can get for free.

If you are a complete beginner in this field, it is obviously recommended that you start with something fairly simple and easy to learn. For this reason, you should give Tinkercad a try.

It is absolutely free and works in your browser – which means you won’t have to install it on your computer. Tinkercad even offers beginner lessons and has a built-in feature to get your 3D model printed via a 3D print service or the 3D printer that you own.

Slicing

The next step in the process is slicing. Remember we told you that in order to make a 3D model of anything, what needs to happen is that individual horizontal cross sections of the complete object must come together in the form of layers.

Slicing refers to that part of the process. It is when you divide your digital 3D blueprint into a number of multiple horizontal cross sections with the same width, so that the printer can work accordingly.

The printer takes your input and further starts printing each layer as you have described it one on top of the other. Now keep in mind that there could be hundreds or even thousands of these individual layers.

The great distinction that some 3D printers in the market enjoy is that they come pre equipped with a built-in slicer that lets you feed the raw .stl, .obj or even CAD file in it.

As soon as your file is sliced, that is divided into different layers, it is ready to be given to the printer which will then start printing out the layers one by one. This transfer can take place using a USB, SD or even the internet.

3D Printing The Industry

You might be thinking that 3D printers and their applications must be very limited in nature, and the overall scope of the genre can’t be much diverse. If that is indeed what you are thinking, you are quite wrong.

3D printing as an industry has actually developed by leaps and bounds and is being used actively in a lot of places. When it comes to the manufacturing industry, a lot of domains are currently in the practice of using 3D printers to get stuff made.

The usage is so much in fact, that the ones who still have not adopted it into their ongoing production, are now one of the counted amongst the minorities.

There are various reasons why 3D printing is being hailed as the next big thing in the industry. First up, manufacturers get to save up on money and time if they make use of an industrial grade 3D printer, as it tends to work quickly and in a more affordable manner.

Even the products that are made this way are generally high quality – depending on the material used and come out looking exactly like what the customers or client wanted.

All these reasons are quite enough to convince manufacturers to integrate additive manufacturing somewhere in their supply chain.

Where 3D printing was only suitable for prototyping and one-off manufacturing in the early stages, it is now rapidly transforming into a production technology.

Top 10 Best 3D Printers In India 2020

1. Wol3D

Wol 3D Best 3D Printer In IndiaWhen it comes to 3D printers, a few things are quite essential. First up, your product should have some backup functionality in case a power outage occurs.

Also, the shapes or models being printed must come out the exact way as you want them. Fortunately, you can find all of these qualities in the WOL3D UPGRADED Creality Ender 3 DIY 3D Printer.

It has the ability to resume printing even after a power outage or lapse occurs. That is, in case you were printing something and unexpectedly lose power, you won’t have to start from scratch all over again when the power comes back.

The machine is smart enough to save your blueprint and actually keep a track of the progress that had been made. That way, when the power comes back on, you get to resume from that exact same position and not lose any progress.

Another highlight of the product is that it is pretty easy to assemble. Whenever you order something, one concern that is almost always there is whether or not you would be able to assemble it in a proper manner.

Fortunately, the Ender 3 has a very simple assembly process. It comes with several assembled parts, in addition to which there are roughly 20 nuts more – which should take you only about 2 hours to assemble.

It is built using advanced technology and the latest methodologies, such as an upgraded extruder which greatly reduces plugging risk, a V-Slot with POM wheels to make it move noiseless, smooth and to increase the durability.

Finally, the power supply that you get with it is safely protected and is efficient enough that it only takes the hot bed 5 minutes to reach 110 degrees.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


2. Wol 3D Ender 3

Wol 3D Ender 3This next one is another variation of the much successful Ender 3 model by Wol 3D. They are one of the industry leaders in the domain of 3D printers and have managed to stay profitable with a great sales record and customer response.

This one comes with the resume print option which is basically the ability to resume printing even if a power outage or lapse occurs. That is, in case you were printing something and unexpectedly lose power, you won’t have to start from scratch all over again when the power comes back.

The machine is smart enough to save your blueprint and actually keep a track of the progress that had been made. That way, when the power comes back on, you get to resume from that exact same position and not lose any progress.

Another highlight of the product is that it is pretty easy to assemble. Whenever you order something, one concern that is almost always there is whether or not you would be able to assemble it in a proper manner.

Fortunately, the Ender 3 has a very simple assembly process. It comes with several assembled parts, in addition to which there are roughly 20 nuts more – which should take you only about 2 hours to assemble.

It is built using advanced technology and the latest methodologies such as an upgraded extruder which greatly reduces plugging risk, a V-Slot with POM wheels to make it move noiseless, smooth and to increase the durability.

Finally, the power supply that you get with it is safely protected and is efficient enough that it only takes the hot bed 5 minutes to reach 110 degrees. Also, all of the major components used here have been strictly tested and verified safe for usage before delivery and life-time technical support.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


3. 3D Innovations Ender-3

3D Innovations Ender-3Creality 3D is an amazing open source software designed especially for 3D printers to help with their functioning and operation. It works really well when it comes to creating virtual blueprints and has everything necessary when it comes to the tools you might need.

The best part is that it is completely open source – which means you could get it free of cost without spending a single buck. It works seamlessly with its wonderful community of users and contributors to improve this open sourced product every day.

The design is a product of the culmination of the work put in by some of the best and brightest minds in the 3D printing world.

The control board which has been upgraded recently offers state of the art, “Resume Print” technology. What this means is that in case your printer suffers any unexpected power outages, it will resume from the last recorded extruder position after the power comes back on – instead of starting right from scratch all over again.

This way, you would rarely have to experience failed prints. The advanced MK-8 extruder’s genius design greatly reduces the risk of clogging and uneven extrusion.

High precision ball bearing wheels made from Delrin/POM engineering thermoplastic deliver high stiffness, low friction, and excellent dimensional stability. It is a very high powered device with an extremely efficient power supply and 2 separate fuses to protect your printer from unexpected power surges.

Also, with the tremendous power supply that is being used, you can heat the build surface to 90*C in just 5 minutes. As for the assembly, since that is one aspect that a lot of people are often concerned with, the lower base and all the wiring is completed right in the factory itself.

This kit style 3D printer comes with all tools included and is an excellent project for middle school and high school-aged students in case they are into assembly and disassembly of things.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


4. Creality 3D Ender 3

Creality 3D Ender 3Creality is a great brand when it comes to 3D printers. They have some really decent models on the market, all of which have managed to sell well and turn in profits for the company. Also, the products they make are of really high quality and they offer good service too.

This one comes with a promise that it can be assembled quite easily. In fact, the brand goes on to claim that you only need about 12 steps for complete installation of the Creality 3D Ender-3 3D printer.

That way, you get to save more time and have more fun. It also has an upgraded MK-10 extruder which reduces the risk of plugging and bad extrusion. It even makes the printing process easier and reduces unnecessary trouble for the user.

There is obviously the Resume printing option, wherein you have a safely protected power supply and in case the machine is shut down due to power failure accidentally, it can continue printing after the power comes back on.

It adopts a V-slot linear bearing system and wheel moving parts, because of which it is super noiseless and outputs smooth printing performance. The big hand twist nut makes the print platform easier to level, while the accuracy is as good as ±0.1mm.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


5. Creality 3D Ender 3

Creality 3D Ender 3This one is also from Creality and thus comes with all of the brand’s promises that make it as good as it is. It is an FDM 3D printer which is compatible with most common materials such as Pla, abs, soft rubber, carbon fibre, petg and more.

It is delivered in the form of an assembly kit with all the core parts pre-assembled, so you don’t have to do any of it yourself. That way, you don’t waste any time on assembly and can jump straight to printing.

Final assembly will usually take 30-90 minutes of time though while it is recommended that you check online videos showing assembly of the Ender 3 to get a better idea of how it is done.

Some other major specifications include a build volume of 220 x 220 x 250mm while the hot bed is made of aluminum and can go up to a temperature of 110° C. Design specifications include 1.75 mm material with a nozzle diameter of 0.4mm.

Finally, the latest feature that has been added and is absolutely essential is that of the resume print – which means that even in case of power cuts or failures, your work will be saved and recorded.

Once the power comes back on, you will be able to resume working as if nothing had happened and won’t lose any of your progress.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


6. 3Idea Creality DIY Kit

3Idea Creality DIY Kit3IDEA is a brand which comes with some amazing promises and great products as well. They offer unique services and their customers almost never leave dissatisfied.

This one comes with a removable build surface plate which basically provides all-round protection to your 3D printer build plate, and ensures consistent temperature throughout the build surface.

It is actually quite easy to remove the printing models after cooling because of this added feature, which adds so much to user convenience.

In terms of the supply and output, the Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, and one that can heat the hot bed to 110℃ in just 5 minutes.

There is obviously the very essential resume print function, which gives you the freedom to work freely and independently without worrying about what is going to happen if you experience a power outage.

Even if there is a power failure, the printer is intelligent enough to save your work so that when the power comes back on, you don’t have to start from scratch. While some other 3D printer models in the market require you to do the assembly all by yourself, that is not the case with this one.

This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. It is almost like experiencing a fun STEM educational experience in mechanical engineering and electronics.

Finally, the manufacturer, 3idea provides you with 3 months of service warranty where you can opt for free of cost support from their expert tech team.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


7. Anet A8

Anet A8With the Anet A8 3D Printer, you get a large build volume of 300x 220 x 220 mm. With this build volume, you can actually print a whole variety of models and objects for a diverse range of applications.

This one is a core XY 3D printer which facilitates faster 3D printing. The materials compatible with this one are pla, abs, petg, petg, hips and composites such as wood, brick, glass and carbon fiber. You can also use flexibles such as tpu and tpe.

Another major highlight of the product is that it is 30 percent faster and quieter than a stock machine. Finally, it also does support offline print, which is especially useful when you are working without a network or a computer.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


8. Xyzprinting Da Vinci Jr 1.0 Pro

Xyzprinting Da Vinci Jr 1.0 ProThis one is easily one of the most expensive products in this list, so we suggest you think long and hard before investing into this one.

It is actually quite different as well, since while the others had a pretty generic interface and outer build, this one comes with a box shaped design that is certainly new and comes with its own virtues.

First up, it is great to look at and seems very attractive and professional. Also, with the steep increase in price, there is also a proportional increase in quality as this one is actually quite good for a lot of different uses.

It is certainly more versatile in nature than some of the other models in the market and will enable you to print some really cool designs that would not have been possible otherwise.

It comes with a 3D Printing Pen, Power Adapter, Operation Instruction Manual and Abs/Pla Filament. The item diameter is 43 cm while the height is 38 cm.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


9. Anet ET4

Anet ET4The Anet ET4 3D Printer comes with a modular design and only takes 20 minutes to install and use, saving you much time and effort.

The enclosed metal unibody design enables a more stable and reliable structure with compact size, while the auto-leveling frees you from time-consuming and labor-intensive leveling tasks. It supports filament run out detection and timely reminders for filament shortage or cut-off filament.

It is equipped with an aluminum substrate hot bed and tempered glass, while there is also quick heating of the bed in less than 5 minutes.

The Resume printing function enables it to function in a way that when the power is restored, the printer will continue to print from the interruption point, giving you no worries about unexpected power outages.

Finally, the precision rollers on X and Y axis reduce printing noise and provides ultra-high print accuracy.

CHECK THE PRICE ON AMAZON!

Check the Cheapest Price on Amazon


10. 3D Bazaar

3D BazaarWith the 3D Bazaar Official Creality Ender 5 3D Printer, you get high-precision printing quality since it is equipped with dual Y axis motors and down-shift Z axis which make it move much more smoothly, thus resulting in fewer points of failure and fewer headaches.

There is a built-in brand power supply, which heats up the hot bed to 110℃ in just 5 minutes. The printer is also effectively shielded from voltage spikes and power outages due to the resume print functionality.

If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste. The Ender 5 comes with several partially assembled kits, making it very easy to assemble and allow you to learn about the basic construction of a 3D printer.

CHECK THE PRICE ON AMAZON!

Conclusion

3D printing is a new technology, but it sure is catching up fast. People and industries are slowly but steadily waking up to the benefits and advantages that you get from the additive manufacturing process.

Which is why, this seems like a great time to invest in a 3D printer. Now if you are confused about how to do that, well that is exactly what this article is for.

Leave a Comment

Your email address will not be published. Required fields are marked *