7 Common Sewing Machine Problems (How to Solve Them?)

ommon Sewing Machine ProblemsToday, most of us are having sewing machines in our homes. We use it for stitching new clothes, repairing worn out and torn clothes, and to customize any of our dresses as per our fitting. While operating any sewing machine, there are chances that the needle may break down, or the battery may go dead, etc.

This article focuses on the seven most identified problems associated with working on a sewing machine. By the time you have read this article, you will be educated enough to identify those problems the next time you work on a sewing machine.

Further, you may take appropriate actions and measures to overcome and avoid them as much as possible.

7 Common Sewing Machine Problems 

1. Bunching up of the Thread

The best way to identify this problem is to check whether there are any knots of extra thread bunched up at the bottom part of the fabric. Now, this problem can cause your fabric to damage, so proper measurement needs to be taken to get rid of this problem.

First of all, you need to remove the sewing from the sewing machine, and cut down the extra thread by scissors. At this stage, if not done properly, there are chances that the sewing machine may get damaged permanently. Once you have removed the fabric, all you need to do is remove the threads carefully. Post this; you are ready to work on your machine again!

2. Bent or Broken Needles

This is one of the most common and the biggest problem faced by people who frequently work on sewing machines. Sometimes, if proper attention is not given, there are chances of accidents. Because of this reason, this problem has become one of the serious issues while working on a sewing machine.

To tackle this situation, firstly stop sewing. Then carefully remove the damaged needle and throw it in the dustbin. Next, insert the correct needle with proper care and precaution into the sewing machine. Once you have done this, you are all set to resume your sewing!

3. Frequent Breaking of Threads

For this type of problem, you must check the type and quality of thread you are using in your sewing machine. This is because there are some threads which are designed especially for hand sewing purposes, and cannot be used with a sewing machine.

Also, while you are re-threading your machine, you must ensure that the pressure foot is removed while threading. This way, you can avoid this problem yourself, that too in a simple way!

4. Inconsistent Bobbin Tension

If you feel that you have to adjust the tension in the bobbin thread now and then, you must check for the bobbin itself. This is because, in case of the plastic bobbin, the tension in the thread becomes less within the bobbin housing itself. Hence, using a good quality bobbin will help you avoid this problem.

5. The Needle gets Unthreaded Itself

Everyone can understand the efforts you made to pass the thread through the eye of the needle, and when the needle comes for sewing, it is found to be unthreaded. This can lead to wastage of your time and efforts.

Therefore, to avoid this situation, all you need to do is to repeat the same process, but with the needle position at the top. For this, you need to rotate the hand wheel towards your direction. The needle will not unthread this time for sure!

6. Machine Making Strange Noises

There are times when you are working on a sewing machine, and the machine starts making strange noises out of nowhere! In such a situation, the first thing you need to do is stop sewing, and to take off your feet from the peddle.

After this, open up the casing of the sewing machine with care, and clean up the internal parts of the machine.

One of the reasons behind the machine making noises is that the mechanism of the sewing machine is facing resistance in smooth operation due to the dust particles accumulated in it over time. Once you have cleaned up the dirt from the machine, it is ready for use again!

7. Machine Skipping Stitches

There can be many reasons behind this fault. Firstly, you need to check whether the needle is installed correctly and that the thread is reaching the bobbin properly. If this is not correct, there are chances that the sewing machine may skip stitches.

For this, all you need to do is re-thread the machine and check again. If the problem still occurs, I would advise you to get some expert check the machine.

Conclusion

Now that we have understood the common problems people face while working on a sewing machine, it is time for you to keep these points in mind the next time you work on your sewing machine. Happy sewing to all!

2 thoughts on “7 Common Sewing Machine Problems (How to Solve Them?)”

Leave a Comment

Your email address will not be published. Required fields are marked *